Does the Amazfit Bip Smartwatch Fall Apart on its own?

Does the Amazfit Bip Smartwatch Fall Apart on its own?

So there’s a pretty popular smartwatch on
the market right now called the Amazfit Bip, costing $80 on Amazon. It’s got some pretty impressive capabilities
for the price, but I’ve had 3 people Tweet me recently saying the screen falls off. Now obviously, this isn’t ideal for a smartwatch. All the best specs in the world aren’t worth
it if the thing just falls apart. It’s time to review the Bip from the inside. Let’s get started. [Intro] This watch is pretty lightweight at just over
an ounce. Pulling the charger out of the box, it’s got
two gold pins on the back. This allows the power to flow through from
the charger into the watch. The dock itself is not magnetic like we’ve
seen on the Apple watch or the Samsung Galaxy watches, but this watch is a fraction of the
price of the big boys, while maintaining a lot of the same functionalities. Because of that super low price, I’m not going
to critique it too much, unless, of course, the screen falls off on its own, in which
case we’ll critique it a lot. Pairing the watch is easy enough. Connects to my Galaxy S8 Plus and updates
itself just fine. The Amazfit has a lot of things going for
it at the $80 price point. It can tell you the weather, exercise heart
rate, and even has a built-in GPS for outdoor running. It can receive text messages and notifications,
but can’t respond. Pretty solid for the price, especially when
paired with a 30 day battery life. I’m not here for the specs though – we’re
here for the insides…and to see if the watch falls apart on its own. The screen of the Amazfit Bip is pretty flush
with the outside body. My fingernails were unable to lift the screen
from the housing. The housing itself is made from plastic. The little knob is made from metal. And there’s a lot more plastic on the back. The stock black bands are made from rubber,
but are standard and interchangeable. I’ll try to lift the screen with my razor. If there was a wide spread screen adhesive
issue, like we saw with the BlackBerry KeyOne smartphone, the screen should be falling off
by now with the amount of pressure that I’m applying. One reason why my screen might be staying
on is because this watch has been out for over a year now. The first batch might have had screen adhesion
issues but could have been quietly fixed. And subsequent batches could have used stronger
adhesive. So far my Amazfit Bip is very well stuck together. Let’s add some heat. Heat is what I would normally use to soften
the adhesive between the glass and whatever frame the glass is stuck to. You can see the 1.28 inch display pixels going
from their normal black color to a softer gray with the heat. But even then, with extreme persuasion, the
screen remains intact. My razor blade can find no entry point between
the glass and plastic layers. Permanent adhesive would make the watch impossible
to repair, but at least now we know the screen won’t be falling off on its own…at least
with the current models. My display was only removed by unreasonable
amounts of force. Since we’re inside, let’s take a closer look. You can see the thin rubbery band of adhesive
surrounding the lip that holds the plastic and glass together. But if we look closely at the Fit Bip owners
who got gypped when the screen slipped and flipped exposing the microchips, making them
second guess their ownerships, we can clearly see that none of the watches have adhesive
around the edges. Or if they did have adhesive at one point,
it’s a different style of adhesive that doesn’t hold anything down. Either way, the insides of their watches are
very clean with no residue. Remember my watch is brand new as of a few
days ago and was purchased over a year after the initial launch of the watch. So Amazfit has had plenty of time to quietly
correct the issue. The internal battery connector is over here
on the right side under the small metal plate which is screwed in with one screw, as well
as glued into the side of the housing with a little dollop of glue near the bottom. Once the metal plate is off, I can unplug
the battery and set it’s little square 200 milliamp hour self off to the side. This supposedly lasts 30 days without needing
to charge. Using GPS and stuff of course will drain it
a little faster, but either way, it’s pretty impressive. The optical heart rate monitor pops out from
inside the watch. There is a slab of glass on the outer layer
making this thing splash proof. The heart rate sensor of the watch is on day
and night, keeping track of everything over on your smartphone. The motherboard has another strange dollop
of glue holding it to the side housing. I guess they ran out of space for more screws. Then the motherboard can come loose. I would suggest unplugging the vibrator motor
before pulling out the main board. Ripping ribbons is detrimental to the device. The vibrator is pretty darn cute though – it’s
another eccentric rotating mass vibrator and I don’t think I’ve ever seen a smaller one. Over on the right side of the watch there
is a gold antenna with contact pads resting up against the bottom of the motherboard with
one last little silver bracket up here at the top next to the hole in the plastic frame. At first glance it might look like a microphone
hole, but since there are no microphones on the motherboard, I’m going to assume this
one’s for the barometer since barometers measure air pressure. And the little hole probably allows the air
inside the watch to match the air outside the watch so it can measure fluctuations with
the weather and altitude. Overall, it’s an interesting watch. And from my one example, it looks like Amazfit
has fixed the Bip screen falling off issue. I do hope though that if any more screens
fall off, that customers will get taken care of. Yeah, $80 is cheap for the amount of tech
this watch provides, but it’s still expensive enough that the watch should last for quite
a long time. Should I take apart more smartwatches in the
future? What fitness trackers would you like to see
taken apart? With so many out there it’s hard to sort through
them all. Come hang out with me on Instagram and Twitter. Thanks a ton for watching, and I’ll see you

100 comments on “Does the Amazfit Bip Smartwatch Fall Apart on its own?

  1. GothBoy UK Post author

    Yes, mine just did tonight whilst playing on the PC. I didn't bang it, knock it or have anything catch on it (I was wearing short sleeves). 🤔

  2. 50,000 subscriber with No videos Post author

    My friend had one of these, I asked him if that was a fake Apple Watch 😂

  3. John Mack Post author

    I had a MS Band it was as tough as nails. Too bad it was discontinued. Tear one down if you can find one.

  4. Mario Mario Post author

    Man…. Destroying electronic is OK! But only if is Apple electronic! Zack you are Shura!

  5. Jerdan Cruz Post author

    Hi. My amazfit bip is now dead either coz of water damage or overcharge. Is it possible to open it but with the intention of bringing it back to life? Thank you in advance.

  6. Mike LeChuck Post author

    Yes it does. My display fell off after 1,5 years. I re-glued it. Time will show how long that will last.

  7. sputtermush68 Post author

    Can't stand these videos like this you must have a lot of money to buy something and then destroy it most people aren't going to buy something and then just tear it up to see how much damage it can take😂

  8. Nasif Zubayer Post author

    I have been using this watch for a year now. Nothing as such happened. Wonder if these people uses the watch or kicks it around… 😒😒

  9. my self Post author

    I dont fuc""g care what other says..screen fall..blla blla all fake..amazfit bip is Super smartwatch

  10. Like a little lego Post author

    Is it me or that batery is just a weeeeeeny tiny bit too rounded at the corners note 7 memories kick in

  11. Martin K Post author

    My screen popped off this last week. Bought it in Singapore Sept 2018 and worn every day since. Not liked it as much as my old Pebble Time but what can I do. I swatted a fly on the ceiling with the back of my hand and pop, off it came. Can't see any old adhesive, tried to push back in. I'm going to have to super glue it. Battery rocks with only notifications turned on, ground the thing against many walls, flight cases etc and it held up well until now

  12. A Random Stan Post author

    "but if we look closely at the fit bip owners that got gypped when the screen slipped and flipping and exposing the microchips, making them second guess their ownerships"

    That seemed like a rhyme and took me a while to comprehend

  13. Theles Silveira Post author

    Hey Jerry, just to let you know, I don't think that the screen just falls apart by itself. In my case, over time, the battery swollen and pushed the screen out. If I try to push the screen back in, it doesn't stay in the case anymore, it keeps popping out. And Amazfit restricts its replacement to just the ones that were bought on their own website.

  14. joshua marston Post author

    is it just me, or does he seem to stiffle giggle a little when he craks that watch at 2:36?

  15. Harry Jin Post author

    My Amazfit Bip (circa April 2018), just "fell apart" while I was sleeping. No adhesive on the inside. I just ordered a replacement, so hoping they have the adhesive improvement. Thanks for the informative video.

  16. Anthony Keep Calm And Soy Musico Post author

    A qué idiota se le ocurre dañar algo nuevo, que estúpido que haya este tipo de videos, gente que no sabe en qué malgastar el dinero.

  17. Shahariar Hossain Post author

    when we were kids we used to bring all toys from shop then distroy part by part. he's doing those things

  18. Tavneet Tathe Post author

    This is request to make a video on durability test of Fossil gen 5 smart watch and galaxy watch please

  19. LILMONSTER 829M Post author

    This was hard to watch casue I just got that watch for my birthday in the same color and it made me feel like you were breaking mine

  20. Макс Колесников Post author

    Поздравляю,ты наткнулся на русский комментарии

  21. Tan Phan Post author

    Funny enough, my amazfit bip screen has just fallen apart after a year. I did a quick search and this is the first video result. The adhersive is intact and stick on the screen side, but I feel zero stickiness as I move my finger across.

  22. XGlite015 Post author

    My amazfit bip also had weak adhesive (it doesn't have any residue) and the screen just popped up one day while I was running. The new adhesive seemed pretty tough though since you cracked the screen before it was successfully removed.

  23. Jesse Jorgensen Post author

    Why would you do that this is a better smart watch than the Apple Watch Series 3! In my opinion⌚️📱⌚️😀


Leave a Reply

Your email address will not be published. Required fields are marked *